PRODUCTS

Home page

PRODUCT

Ordinary load-bearing TEZ type drag chain

TEZ series load-bearing drag chain manufacturers use glass fiber reinforced nylon as raw material injection molding, with load-bearing, wear-resistant, long use and other characteristics. The crossbar of the nylon drag chain can be opened on the inside and outside, and is equipped with double-sided vanity or iron connectors for long overhead lengths.

Keywords：

Classification:

Drag chain

400-8037-360

Inquiry

Details

Product Introduction

Load-bearing engineering drag chain selection of glass fiber reinforced nylon as raw material injection molding, with load-bearing, wear-resistant, long use and other characteristics. It is shaped like a tank chain and consists of many unit chain links, which can rotate freely. When selecting the engineering drag chain, the inner height, outer height and pitch of the same series are the same, and the inner height and bending radius R can be selected differently. The unit chain link consists of left and right chain plates and upper and lower cover plates. Each section of the nylon plastic drag chain can be opened, which is convenient to assemble and disassemble without threading. After opening the cover plate, cables, oil pipes, air pipes, etc. can be put into the drag chain. Separators can be provided according to different types of engineering drag chains to separate the space in the chain as required.

Product Features

The crossbar can be opened inside and outside

Equipped with double-sided vanity piece or iron connector

Friction and Corrosion Resistant, Coasting Applications

For long overhead lengths

Beautiful appearance, atmospheric

Product advantages

Load-bearing engineering plastic drag chain is better than ordinary plastic drag chain material, thickness to be large. It is suitable for places where there are more mechanical cables of machine tools or where heavy objects are pressed on the drag chain. Strong service life. The exquisite design of the middle yellow shaft makes the chain itself more beautiful and generous. While providing value to the machine tool, it also increases the overall aesthetics of the machine tool.

Applicable occasions

Places with high noise requirements

High speed or acceleration

Large wear or corrosion and load-bearing requirements

Not suitable for the occasion

Extremely cold zone

Temperature above 130 ℃

Selection Ordering Example

Model	Inner height (mm)	Optional inner width (mm)	Optional bend radius	Pitch	Type
TEZ25K1 Series	25	25.38.50.57.75.103	55.75.100.125.150	45	Bridge type inner opening cover
TEZ25F1 Series	25	25.38.50.75.103	75.100.125	36	Closed inner opening cover
TEZ25K2 Series	25	25.38.50.57.75.103.125.150	55.75.100.125.150	44	Bridge-type four-piece
TEZ25F2 Series	25	25.38.50.57.75.103.125.150	75.100.125.150	44	Closed four-piece
TEZ35D Series	35	50.60.75.100.125.150.175.200	75.100.125.150.200.250	66	Bridge/Closed
TEZ45D Series	45	50.75.100.125.150.175.200	75.100.125.150.200.250	66
TEZ56D Series	56	100.125.150.175.200.250	150.200.250.300.350.400.500	91
TEZ65D Series	65	100.125.150.175.200.250	150.200.250.300.350.400.500	96
TEZ80D Series	80	100.125.150.175.200.250.300	200.250.300.350.400.500	110

How to identify the pros and cons of plastic drag chain

	Good drag chain	Poor drag chain

a look	See the overall effect of drag chain A good drag chain has fine appearance, fine texture, round and smooth color, good overall effect and small deformation.	See the overall effect of drag chain The poor drag chain looks rough in appearance, uneven in color, poor in visual effect, and large in deformation.
Second touch.	Touch the surface, edges and inner wall of the drag chain by hand Good drag chain smooth surface, no tie feel; more flexible and convenient when rotating, less friction.	Touch the surface, edges and inner wall of the drag chain by hand The surface of the poor drag chain is rough, uneven, and feels like a prick; it is bulky and has greater friction when rotating.
Three Smells	Smell the smell; listen to the sound of beating the hard place of the chain The sound of beating a good drag chain is relatively low, and it feels thick and heavy. There is no obvious smell.	Smell the smell; listen to the sound of beating the hard place of the chain The sound of the drag chain with poor beating is crisp and feels empty and light. The smell is heavier and has a pungent smell.
four rub	Rub the surface of the plastic drag chain with the help of external force A good drag chain is more difficult to rub up, and the scraps rubbed down are fine and powdery. Cut the product to check the transverse section of the drag chain.	Rub the surface of the plastic drag chain with the help of external force Poor drag chain is easy to rub out pits, debris is granular, cut the product to check the cross section of the drag chain
five-cut	Cut the product to see the cross section of the chain The cross section of a good drag chain is uniform and has no obvious stratification.	Cut the product to see the cross section of the chain The cross section of the poor drag chain will be clearly layered and the stripes will be clearly visible.
Six weigh	Weigh the price-performance ratio of the product A good drag chain is more expensive, has a longer service life, has a heavier load, and has good wear resistance	Weigh the price-performance ratio of the product The poor drag chain is cheap, the service life is short, the load is light, the wear resistance is poor, and the replacement is more frequent

Super long load-bearing TLZ type drag chain

Dexterous and lightweight TP type drag chain

Inquiry

Product name：

Submit