Product Introduction

Warning lights, also known as alarm, warning light signal indicator, signal lights, a wide variety of uses, the factory production of signal indicator is suitable for a variety of mechanical fault signals, material supply and interruption, operation instructions and other signals of remote monitoring. Signal lamp its classification: 1, often bright multi-layer indicator light, 2, strobe multi-layer indicator light, 3, reflection rotating multi-layer indicator light, 4, ordinary strobe indicator light, 5, ordinary reflection rotating indicator light, 6, combined indicator light.

Product Features

Product advantages

● Due to the use of LED light source, the warning lamp of RIO LED machine tool has a long life of 100000 hours and is guaranteed to be used for 5 years (about 10 years), thus almost avoiding the loss of working hours caused by the failure of machine tool lamp. (The traditional halogen lamp has a service life of only about 2,000-3,000 hours, while each broken lamp is in the process of processing. Each replacement or repair process takes 30 minutes, and the machine tool and labor loss is at least nearly 100 yuan! Invisible losses such as the impact on the construction period have not been calculated. 1 LED lamp = 20 traditional halogen lamps, reducing the probability of 20 bad lamps!)

● No flicker, no electromagnetic wave radiation (even the traditional eye protection lamp can't do it), more eye protection, eliminate the visual fatigue of the master, and be healthier than the eye protection lamp! Cold light source, heat is small, never hot, reduce accidents

● The appearance of the industry's most mature, the most widely loved modeling, workmanship more sophisticated, thereby greatly increasing the aesthetic degree of machine tools

● Green lighting, obvious power saving, 3W is equivalent to 50W, power saving 47W, calculated by 15 hours per day, total power saving for 5 years: 47W * 15 hours * 365 days * 5 years/1000=1286 degrees, and the economical warning working lamp is Ruiao.

Scope of application

The warning lamp adopts a lampshade designed inside and outside the corner, with wide light range, sufficient luminosity, bright color and texture exceeding that of ordinary products of the same level. The inside adopts a three-dimensional structure with no shade and high light transmission. The outside of the lampshade will not reveal shadows and can be irradiated in all directions without dead corners. The whole series is made of shock-absorbing rubber, which can form an electric absorber and can effectively absorb most of the vibration frequency to reduce the impact on the bulb, in turn, it can effectively extend the service life of the product. The appearance of the machine tool warning light is designed with a soft curve, the middle part is clear and transparent, and the lamp beads arranged in a straight line are beautiful and generous, which can make people in the industry shine at the moment, thus greatly increasing the beauty and fashion of the machine tool. The device is usually used for industrial machinery, special machines and other operating status display. It can also be used to display the operating status of automated production lines, mechanical arms, factory monitoring process systems and various related equipment, and can also be used for standby processing and warning of dangerous situations.