Product Introduction

The oil mist purifier can absorb and purify about 99% of the harmful substances in the machining environment, which can protect the health of workers and extend the service life of the equipment. Although there are no strict regulations on the use of oil mist purifiers for processing equipment operating in a closed environment in China, the installation of oil mist purifiers has been listed as industry regulations in developed countries such as Europe and the United States. Therefore, the installation of oil mist purifier has become a historical trend. The oil mist purifier can recycle and filter industrial raw materials such as expensive metal cutting fluids. This not only improves the utilization rate of industrial raw materials, but also reduces the processing cost of enterprises, but also avoids the waste of resources.

Product Features

Product advantages

Easy to clean, life of more than 10 years.

● No consumables, no waste water, no secondary pollution.

● The recovery rate is ≥ 95%, up to 99%, and the performance is constant, and it will never drop in the later period.

The power consumption is much lower than the traditional equipment, the air volume is sufficient and constant, the noise is low, and it has the function of automatic fire prevention.

● The overall solution to the workshop oil mist, water mist and other issues, greatly improve the working environment of workers without another negative pressure fan.

● The source solves the problem of oil mist and water mist generated during the operation of mechanical equipment. There is no need to worry about the hidden danger of fire left by pipeline blockage and oil accumulation. The recovered oil flows directly into the equipment and is recycled, thus greatly reducing the cost for customers.

work benefit

1. The oil mist generated by the machine tool during the processing process has an adverse effect on the respiratory system and skin health of the human body, which will reduce the work efficiency of employees; people who work in this environment for a long time have a high probability of occupational diseases. Will increase the labor insurance expenditure of the enterprise;

2, oil mist will be paid on the floor, may make people slip to cause accidents, increase the accident damage compensation of enterprises;

3, oil mist in the air, a long time will lead to machine tool circuit system, control system failure, increase maintenance costs;

4. Oil mist is directly discharged in the air-conditioning workshop, which will reduce and damage the energy efficiency of the air-conditioning and greatly increase the cost of air-conditioning; if the oil mist is discharged to the outside, it will not only damage the environment (affect the social image of the enterprise, but also may be punished by the environmental protection department), and may create fire hazards, resulting in accidental loss of property;

5. The oil mist purifier of the machine tool can recycle and reuse the emulsifying agent atomized during the cutting of the machine tool to reduce its loss. The specific recovery benefit data depends on the degree of fog produced by the machine tool. Generally speaking, the higher the concentration of the fog, the better the recovery benefit.

Working principle

When the controller is connected to the power supply, the strong negative pressure generated by the mist suction port forces the oil mist to be sucked into the mist suction device. The oil mist particles collide under the action of the wind wheel in the oil mist purifier, and the tiny particles are collected into larger particles that can be controlled. They are intercepted under the blocking of high-efficiency mist absorbing materials, and collected and recovered through the return port.

Product classification

Centrifugal:The air containing oil smoke is sucked into the oil mist collector, and the particulate matter in the air is filtered out by centrifugal rotation to purify the gas.

Main advantages

Simple structure, low upfront costs

The maintenance cycle is long, and the filter element needs to be replaced in the later period.

Electrostatic:The oil smoke particles are charged by corona discharge, and when the charged particles pass through the electrostatic collector composed of a high-pressure plate, they are adsorbed on the metal plate and collected for reuse, and the purified air is discharged.

Main advantages

Workshop for heavy oil mist pollution

Higher upfront costs

Easy maintenance, no consumables

Product use

Oil mist purifier can be used for cutting oil, emulsion and synthetic coolant in the processing of oil mist and water mist.

CNC lathes, machine tools, cleaning machines, excircles, surface grinders, gear hobbing, milling and gear shaper machines, vacuum pumps, spray laboratories, EDM, CNC machining centers.

Product Parameters

Application sites

● Mechanical plant (including CNC lathes, machining centers, cylindrical grinding machines, gear grinding machines, EDM machine tools, grinding machines, lens grinding machines, die casting machines, etc.)

● Power plant ● Forging plant ● Bearing plant ● Thermomagnetic electronics plant ● Vacuum equipment plant ● Ultrasonic cleaning equipment plant ● Hardware machinery plant